Lambertones | The GRINDER | Clean & Crisp Humbucker PAF Guitar Pickup | Higher Output

The GRINDER is higher output than our CREMA model, and has been compared to a vintage P.A.F. with a modern flare. The GRINDER pushes breakup at the source while still maintaining incredible note articulation. No dark muddy mids, lost lows, or piercing highs. The GRINDER uses a unique wire and magnet combination to balance output with dynamics, drive with clarity, and presence with compression.

If you’ve experienced our CREMA humbuckers the GRINDER is approximately 15-20% higher output and naturally closer to the edge of breakup.

Neck Specs: 4.7k DCR, AlNiCo V

Bridge Specs: 6.05k DCR, AlNiCo VIII

WIRING OPTIONS

- 2-Wire for Vintage Gibson Style Wiring

- 4-Wire for for Push/Pull Coil-Tap, COil-Split and Phase Reversal Capability

>> Installation Guide PDF

2-wire Conductor
These are the simplest form of install and have a vintage look/feel. With a 3-way switch you have:

Position 1: Full Bridge Humbucker
Position 2: Both Humbuckers
Position 3: Full Neck Humbucker

The outside weaved sleeve is the ground and gets soldered to the back of your volume pot (or main ground) and the inside black push-back wire is your positive signal which is soldered to the switch. A no nonsense way of wiring our humbuckers.

4-wire Conductor
Want to utilize a push/pull pot, split the coils for in-between positions, or combining with other manufacturers pickups? The 4-wire gives you freedom to do that.

For standard "humbucking" mode just twist the white/red wirestogether and solder, tape off or use shrink wrap, then run theGreen signal wire to the switch and the Black & braided ground wiresto the back of your volume pot.
To split the coil(s), solder the white/red wires wires together and to your push/pull pot by following your push/pull manufacturers instructions.

Humbucker Color Code
Bare - Ground

Black - Negative signal to Ground (Screw coil start)

White - Screw coil finish

Red - Slug coil finish

Green - Positive signal to Switch (Slug coil start)

Please note that most Lambertones pickups are made to order. Please email us to check current availability. Otherwise, the average lead time is 2-3 weeks.

Product Information

Shipping & Returns

Lambertones | The GRINDER | Clean & Crisp Humbucker PAF Guitar Pickup | Higher Output

Name: Lambertones | The GRINDER | Clean & Crisp Humbucker PAF Guitar Pickup | Higher Output
Brand: Gsus4
SKU: lambertones-grinder
Availability: InStock

If you’ve experienced our CREMA humbuckers the GRINDER is approximately 15-20% higher output and naturally closer to the edge of breakup.

Neck Specs: 4.7k DCR, AlNiCo V

Bridge Specs: 6.05k DCR, AlNiCo VIII

WIRING OPTIONS

- 2-Wire for Vintage Gibson Style Wiring

- 4-Wire for for Push/Pull Coil-Tap, COil-Split and Phase Reversal Capability

>> Installation Guide PDF

2-wire Conductor
These are the simplest form of install and have a vintage look/feel. With a 3-way switch you have:

Position 1: Full Bridge Humbucker
Position 2: Both Humbuckers
Position 3: Full Neck Humbucker

4-wire Conductor
Want to utilize a push/pull pot, split the coils for in-between positions, or combining with other manufacturers pickups? The 4-wire gives you freedom to do that.

For standard "humbucking" mode just twist the white/red wirestogether and solder, tape off or use shrink wrap, then run theGreen signal wire to the switch and the Black & braided ground wiresto the back of your volume pot.
To split the coil(s), solder the white/red wires wires together and to your push/pull pot by following your push/pull manufacturers instructions.

Humbucker Color Code
Bare - Ground

Black - Negative signal to Ground (Screw coil start)

White - Screw coil finish

Red - Slug coil finish

Green - Positive signal to Switch (Slug coil start)

Please note that most Lambertones pickups are made to order. Please email us to check current availability. Otherwise, the average lead time is 2-3 weeks.

Select TYPE

Select COVER TYPE

Select CONDUCTOR WIRES

From $85.25

Original: $243.58

-65%

Lambertones | The GRINDER | Clean & Crisp Humbucker PAF Guitar Pickup | Higher Output—

$243.58

$85.25

Select TYPE

Select COVER TYPE

Select CONDUCTOR WIRES

From $85.25

Original: $243.58

-65%

Lambertones | The GRINDER | Clean & Crisp Humbucker PAF Guitar Pickup | Higher Output—

$243.58

$85.25

Product Information

Shipping & Returns

Description

If you’ve experienced our CREMA humbuckers the GRINDER is approximately 15-20% higher output and naturally closer to the edge of breakup.

Neck Specs: 4.7k DCR, AlNiCo V

Bridge Specs: 6.05k DCR, AlNiCo VIII

WIRING OPTIONS

- 2-Wire for Vintage Gibson Style Wiring

- 4-Wire for for Push/Pull Coil-Tap, COil-Split and Phase Reversal Capability

>> Installation Guide PDF

2-wire Conductor
These are the simplest form of install and have a vintage look/feel. With a 3-way switch you have:

Position 1: Full Bridge Humbucker
Position 2: Both Humbuckers
Position 3: Full Neck Humbucker

4-wire Conductor
Want to utilize a push/pull pot, split the coils for in-between positions, or combining with other manufacturers pickups? The 4-wire gives you freedom to do that.

For standard "humbucking" mode just twist the white/red wirestogether and solder, tape off or use shrink wrap, then run theGreen signal wire to the switch and the Black & braided ground wiresto the back of your volume pot.
To split the coil(s), solder the white/red wires wires together and to your push/pull pot by following your push/pull manufacturers instructions.

Humbucker Color Code
Bare - Ground

Black - Negative signal to Ground (Screw coil start)

White - Screw coil finish

Red - Slug coil finish

Green - Positive signal to Switch (Slug coil start)

Please note that most Lambertones pickups are made to order. Please email us to check current availability. Otherwise, the average lead time is 2-3 weeks.